Buying a House With a Heat Pump: What to Check Before You Commit
Buying a House With a Heat Pump: What to Check Before You Commit
Buying a House With a Heat Pump: What to Check Before You Commit
Buying a House With a Heat Pump: What to Check Before You Commit
Buying a House With a Heat Pump: What to Check Before You Commit

UK Heat pump Help Technical Team
Independent Heat Pump Engineer
Buying a house with a heat pump is a different experience from buying one with a gas boiler. The heating system isn't a box on the wall that either works or doesn't. It's a system whose comfort and running costs depend on how it was designed, set up and looked after. Two near-identical houses can have very different bills because of it.
The Energy Saving Trust has reported that around 13% of heat pump owners moved into a home that already had one. Most of them viewed the house knowing little about the heating. This guide covers what to ask, what to look at, which documents to request and which warning signs to take seriously. It's written independently, so you'll get no sales pitch, just what we'd check ourselves.
Why a heat pump changes how you view a house
A gas boiler heats water to a high temperature quickly, so it can mask poor design. Radiators that are too small, or a house that loses heat quickly, still produce a warm home, just at a higher cost.
A heat pump works best at a lower flow temperature, running steadily for long periods. If the system was designed for that, it's efficient and comfortable. If it wasn't, the heat pump is usually forced to work harder to compensate. In practice that means:
Higher electricity use than the previous owner admits to, or realises.
Rooms that never quite reach temperature.
Heavy reliance on the immersion heater for hot water.
A system that cycles on and off or runs constantly.
None of this means a heat pump is a risk. It means the quality of the installation matters more than the brand on the outdoor unit, and that's what you're really assessing when you view the property.
Step 1: Ask for the paperwork before the viewing
Ask the seller (via the agent) for these documents. A seller who knows their system well can usually find them quickly.
Installation and certification
MCS certificate and installer commissioning certificate. These show the installation was carried out under a quality assurance scheme and signed off. To understand what MCS does and doesn't tell you, read our guide on whether MCS certification guarantees correct sizing.
Evidence the installation was notified to the electricity network operator (DNO). This is a legal requirement and is normally handled by the installer. Our articles on what "connect and notify" means and when approval is needed explain the process.
The installer's name and contact details, plus any warranty paperwork. Check whether a warranty is still valid and whether it requires annual servicing.
Design and performance
The heat loss calculation or system design, if one exists. This is the document that shows whether the heat pump was sized to the house. If the seller has never seen one, that tells you something. We explain why in what a heat loss calculation is and why it matters.
Service records. The Energy Saving Trust notes that heat pumps should be serviced once a year, or as the installer recommends. Gaps in the record are worth asking about, and our guide to what happens if you don't service your heat pump shows why.
The EPC, for the recommendations and the overall fabric picture.
Costs
Energy bills for at least a full winter. Ask the seller to show energy use in kWh if they can, not just pounds. Many heat pump apps and controllers show monthly or even daily consumption.
Their tariff. Time-of-use tariffs change the cost picture, and we cover the options in the best electricity tariffs for heat pump owners.
If the heat pump is older, the owner may also be receiving government heating payments. Those have their own transfer process, so ask about it directly.
Step 2: What to look at during the viewing
You don't need to be an engineer. Most of the useful checks are visual, and the rest are just conversation.
The outdoor unit
Condition: look for obvious corrosion, damage, or debris blocking the fins.
Airflow: the unit needs clear space around it. Shrubs, fences or tight corners can restrict airflow, so see where an air source heat pump should go.
Position: note how close it is to bedroom windows and boundaries. Ask the seller how noisy it is, and compare their answer with our guide to what's normal for heat pump noise.
Pipework: exposed pipes between the unit and the house should be well insulated. Poor insulation is a common weak point, which we cover in heat pump pipe insulation.
The plant room, cupboard or utility space
Tidiness and labelling. Neat, labelled pipework and a clean installation usually reflect care during commissioning. A cluttered or unlabelled mess often reflects the opposite.
A hot water cylinder. If there isn't one, find out how the house gets hot water, because that changes running costs. See do you need a hot water cylinder with a heat pump.
The pressure gauge. Look for a gauge in a sensible range. Persistent low pressure or evidence of repeated top-ups is worth asking about.
Signs of leaks or staining around valves and joints.
The controller
Ask the seller to show you the display. Useful things to note:
The flow temperature while heating is running. If it's sitting at the very top of the range in mild weather, the system may be working harder than it should. Our guide to what flow temperature a heat pump should run at gives you a baseline.
Any active alarms or recent fault history. Ask what each one was. Our fault codes guide helps you judge how serious a code is.
Whether the app or controller is accessible. You want to know who the account belongs to and how it will transfer.
The house itself
Radiators: are they large or double-panelled, or small ones left over from a boiler system? Undersized emitters are a classic cause of high flow temperatures. See do heat pumps need bigger radiators.
Comfort on the day: notice whether the house feels evenly warm, especially if the heating is running while you view.
Closed TRVs and portable electric heaters: these suggest rooms that don't get warm enough.
Step 3: Questions to ask the seller
Keep the tone friendly. You're not interrogating them, you're learning how the house lives.
How long have you had the heat pump, and who installed it?
What were your electricity bills last winter, and how many kWh did the heat pump use?
Is every room comfortably warm in cold weather, or are there problem areas?
Has it ever shown a fault code, lost pressure or needed an engineer? What was done?
How often is it serviced, and by whom?
Do you rely on the immersion heater for hot water? (See why a heat pump might use the immersion heater so much.)
Is it noisy at any time, or does it run constantly?
What heating schedule and settings do you use?
Were radiators, pipework or the cylinder changed when it was installed?
Can you show me how you operate it?
If the answers are specific and confident, that's a good sign. Vague answers aren't necessarily bad, but they mean you'll want more evidence from the documents.
What a standard survey usually won't tell you
A general building survey comments on the visible condition of a property, and heating is typically covered only at a surface level. It isn't designed to assess whether a heat pump was sized correctly, commissioned properly or set up efficiently. Those are performance questions, not condition questions.
That's where an independent technical view helps. It can answer the questions a standard survey doesn't: does the design match the house, are the settings sensible, and is anything likely to cost you money in your first winter? Our article on when to get an independent heat pump review explains how that works in practice.
Red flags worth taking seriously
What you notice | Why it matters |
|---|---|
No MCS or commissioning paperwork | You can't verify the installation, and it may affect warranty and support |
No evidence of DNO notification | An unregistered installation can cause problems later |
No service history | The system may have been neglected, see how often to service a heat pump |
Flow temperature constantly very high | Often points to undersized radiators or a design issue |
Heavy immersion heater use | Hot water may be costing far more than it should |
Controller shows repeated alarms | Could be a settings issue, or a recurring fault |
Seller can't explain the bills | You can't judge the running cost without data |
Rooms that never reach temperature | A sizing, balancing or heat loss problem, see why a heat pump might not reach temperature |
One red flag isn't a reason to walk away. Most of these problems are fixable, and many turn out to be settings rather than faults. But a pile of them together is a reason to dig deeper before you exchange contracts.
If you find problems: use it in your negotiation
Finding an issue doesn't have to end the sale. It gives you information. Depending on what you find, you can:
Ask for it to be fixed before completion.
Negotiate the price, using realistic costs. Our guides on heat pump repair costs and repair or replace give you a starting point.
Plan for the work in your first-year budget, so there are no surprises.
For a sense of how long you can expect a system to last, see how long heat pumps last.
After you move in: your first 30 days
Once the keys are yours, a few simple steps set you up well:
Collect everything: manuals, certificates, installer contact details and service records.
Get a handover demonstration from the previous owner if you can. Ask what heating pattern worked for them.
Check the hot water settings, including the periodic higher-temperature cycle that protects against legionella. Our guide to the heat pump legionella cycle explains why it happens.
Review your tariff. A heat pump household often benefits from a different tariff from a gas-boiler household.
Learn how to run it efficiently. Heat pumps generally do best running steadily at a low flow temperature, which can feel different if you're used to a boiler. See how to set a heat pump for maximum efficiency.
Book a proper check before winter. Finding a problem in autumn is much easier than finding it in the first cold snap. Our guide to what's included in a heat pump service shows what a thorough one covers.
If something isn't right in those first weeks, such as high bills or cold rooms, our guide to why a heat pump might be using too much electricity is a good first stop.
Frequently asked questions
Is a heat pump a good thing to find in a house you're buying? It can be. A well-designed, well-maintained heat pump means low-carbon heating and potentially good running costs. The key word is well: the quality of the installation and upkeep matters more than the fact that one is there.
What documents should I ask for? At minimum: the installation certificate and commissioning record, DNO notification, warranty details, service history, and energy use data. If a heat loss calculation or design document exists, ask for that too.
What happens if the heat pump wasn't registered with the electricity network? Installers are responsible for notifying the network operator. If this wasn't done, the Energy Saving Trust notes the operator could in theory require removal, so it's worth resolving through the seller or installer before completion.
How do I know if the running costs are reasonable? Ask for kWh figures from the app or controller rather than just a bill total, because bills include other usage. Then compare it with the size and insulation of the home, and with our guide to what a heat pump should cost to run in winter.
Can I get an independent opinion before I buy? Yes. An independent engineer can review the documents, settings and design with no interest in selling you anything. See the service section below, or contact us to talk through your situation.
The bottom line
A heat pump shouldn't put you off a house, but it should change the questions you ask. Get the paperwork, get the kWh figures, look at the plant room and the controller, and take any pile-up of red flags seriously. Do that and you'll know what you're buying, and what it's likely to cost you in your first winter.
Buying a house with a heat pump is a different experience from buying one with a gas boiler. The heating system isn't a box on the wall that either works or doesn't. It's a system whose comfort and running costs depend on how it was designed, set up and looked after. Two near-identical houses can have very different bills because of it.
The Energy Saving Trust has reported that around 13% of heat pump owners moved into a home that already had one. Most of them viewed the house knowing little about the heating. This guide covers what to ask, what to look at, which documents to request and which warning signs to take seriously. It's written independently, so you'll get no sales pitch, just what we'd check ourselves.
Why a heat pump changes how you view a house
A gas boiler heats water to a high temperature quickly, so it can mask poor design. Radiators that are too small, or a house that loses heat quickly, still produce a warm home, just at a higher cost.
A heat pump works best at a lower flow temperature, running steadily for long periods. If the system was designed for that, it's efficient and comfortable. If it wasn't, the heat pump is usually forced to work harder to compensate. In practice that means:
Higher electricity use than the previous owner admits to, or realises.
Rooms that never quite reach temperature.
Heavy reliance on the immersion heater for hot water.
A system that cycles on and off or runs constantly.
None of this means a heat pump is a risk. It means the quality of the installation matters more than the brand on the outdoor unit, and that's what you're really assessing when you view the property.
Step 1: Ask for the paperwork before the viewing
Ask the seller (via the agent) for these documents. A seller who knows their system well can usually find them quickly.
Installation and certification
MCS certificate and installer commissioning certificate. These show the installation was carried out under a quality assurance scheme and signed off. To understand what MCS does and doesn't tell you, read our guide on whether MCS certification guarantees correct sizing.
Evidence the installation was notified to the electricity network operator (DNO). This is a legal requirement and is normally handled by the installer. Our articles on what "connect and notify" means and when approval is needed explain the process.
The installer's name and contact details, plus any warranty paperwork. Check whether a warranty is still valid and whether it requires annual servicing.
Design and performance
The heat loss calculation or system design, if one exists. This is the document that shows whether the heat pump was sized to the house. If the seller has never seen one, that tells you something. We explain why in what a heat loss calculation is and why it matters.
Service records. The Energy Saving Trust notes that heat pumps should be serviced once a year, or as the installer recommends. Gaps in the record are worth asking about, and our guide to what happens if you don't service your heat pump shows why.
The EPC, for the recommendations and the overall fabric picture.
Costs
Energy bills for at least a full winter. Ask the seller to show energy use in kWh if they can, not just pounds. Many heat pump apps and controllers show monthly or even daily consumption.
Their tariff. Time-of-use tariffs change the cost picture, and we cover the options in the best electricity tariffs for heat pump owners.
If the heat pump is older, the owner may also be receiving government heating payments. Those have their own transfer process, so ask about it directly.
Step 2: What to look at during the viewing
You don't need to be an engineer. Most of the useful checks are visual, and the rest are just conversation.
The outdoor unit
Condition: look for obvious corrosion, damage, or debris blocking the fins.
Airflow: the unit needs clear space around it. Shrubs, fences or tight corners can restrict airflow, so see where an air source heat pump should go.
Position: note how close it is to bedroom windows and boundaries. Ask the seller how noisy it is, and compare their answer with our guide to what's normal for heat pump noise.
Pipework: exposed pipes between the unit and the house should be well insulated. Poor insulation is a common weak point, which we cover in heat pump pipe insulation.
The plant room, cupboard or utility space
Tidiness and labelling. Neat, labelled pipework and a clean installation usually reflect care during commissioning. A cluttered or unlabelled mess often reflects the opposite.
A hot water cylinder. If there isn't one, find out how the house gets hot water, because that changes running costs. See do you need a hot water cylinder with a heat pump.
The pressure gauge. Look for a gauge in a sensible range. Persistent low pressure or evidence of repeated top-ups is worth asking about.
Signs of leaks or staining around valves and joints.
The controller
Ask the seller to show you the display. Useful things to note:
The flow temperature while heating is running. If it's sitting at the very top of the range in mild weather, the system may be working harder than it should. Our guide to what flow temperature a heat pump should run at gives you a baseline.
Any active alarms or recent fault history. Ask what each one was. Our fault codes guide helps you judge how serious a code is.
Whether the app or controller is accessible. You want to know who the account belongs to and how it will transfer.
The house itself
Radiators: are they large or double-panelled, or small ones left over from a boiler system? Undersized emitters are a classic cause of high flow temperatures. See do heat pumps need bigger radiators.
Comfort on the day: notice whether the house feels evenly warm, especially if the heating is running while you view.
Closed TRVs and portable electric heaters: these suggest rooms that don't get warm enough.
Step 3: Questions to ask the seller
Keep the tone friendly. You're not interrogating them, you're learning how the house lives.
How long have you had the heat pump, and who installed it?
What were your electricity bills last winter, and how many kWh did the heat pump use?
Is every room comfortably warm in cold weather, or are there problem areas?
Has it ever shown a fault code, lost pressure or needed an engineer? What was done?
How often is it serviced, and by whom?
Do you rely on the immersion heater for hot water? (See why a heat pump might use the immersion heater so much.)
Is it noisy at any time, or does it run constantly?
What heating schedule and settings do you use?
Were radiators, pipework or the cylinder changed when it was installed?
Can you show me how you operate it?
If the answers are specific and confident, that's a good sign. Vague answers aren't necessarily bad, but they mean you'll want more evidence from the documents.
What a standard survey usually won't tell you
A general building survey comments on the visible condition of a property, and heating is typically covered only at a surface level. It isn't designed to assess whether a heat pump was sized correctly, commissioned properly or set up efficiently. Those are performance questions, not condition questions.
That's where an independent technical view helps. It can answer the questions a standard survey doesn't: does the design match the house, are the settings sensible, and is anything likely to cost you money in your first winter? Our article on when to get an independent heat pump review explains how that works in practice.
Red flags worth taking seriously
What you notice | Why it matters |
|---|---|
No MCS or commissioning paperwork | You can't verify the installation, and it may affect warranty and support |
No evidence of DNO notification | An unregistered installation can cause problems later |
No service history | The system may have been neglected, see how often to service a heat pump |
Flow temperature constantly very high | Often points to undersized radiators or a design issue |
Heavy immersion heater use | Hot water may be costing far more than it should |
Controller shows repeated alarms | Could be a settings issue, or a recurring fault |
Seller can't explain the bills | You can't judge the running cost without data |
Rooms that never reach temperature | A sizing, balancing or heat loss problem, see why a heat pump might not reach temperature |
One red flag isn't a reason to walk away. Most of these problems are fixable, and many turn out to be settings rather than faults. But a pile of them together is a reason to dig deeper before you exchange contracts.
If you find problems: use it in your negotiation
Finding an issue doesn't have to end the sale. It gives you information. Depending on what you find, you can:
Ask for it to be fixed before completion.
Negotiate the price, using realistic costs. Our guides on heat pump repair costs and repair or replace give you a starting point.
Plan for the work in your first-year budget, so there are no surprises.
For a sense of how long you can expect a system to last, see how long heat pumps last.
After you move in: your first 30 days
Once the keys are yours, a few simple steps set you up well:
Collect everything: manuals, certificates, installer contact details and service records.
Get a handover demonstration from the previous owner if you can. Ask what heating pattern worked for them.
Check the hot water settings, including the periodic higher-temperature cycle that protects against legionella. Our guide to the heat pump legionella cycle explains why it happens.
Review your tariff. A heat pump household often benefits from a different tariff from a gas-boiler household.
Learn how to run it efficiently. Heat pumps generally do best running steadily at a low flow temperature, which can feel different if you're used to a boiler. See how to set a heat pump for maximum efficiency.
Book a proper check before winter. Finding a problem in autumn is much easier than finding it in the first cold snap. Our guide to what's included in a heat pump service shows what a thorough one covers.
If something isn't right in those first weeks, such as high bills or cold rooms, our guide to why a heat pump might be using too much electricity is a good first stop.
Frequently asked questions
Is a heat pump a good thing to find in a house you're buying? It can be. A well-designed, well-maintained heat pump means low-carbon heating and potentially good running costs. The key word is well: the quality of the installation and upkeep matters more than the fact that one is there.
What documents should I ask for? At minimum: the installation certificate and commissioning record, DNO notification, warranty details, service history, and energy use data. If a heat loss calculation or design document exists, ask for that too.
What happens if the heat pump wasn't registered with the electricity network? Installers are responsible for notifying the network operator. If this wasn't done, the Energy Saving Trust notes the operator could in theory require removal, so it's worth resolving through the seller or installer before completion.
How do I know if the running costs are reasonable? Ask for kWh figures from the app or controller rather than just a bill total, because bills include other usage. Then compare it with the size and insulation of the home, and with our guide to what a heat pump should cost to run in winter.
Can I get an independent opinion before I buy? Yes. An independent engineer can review the documents, settings and design with no interest in selling you anything. See the service section below, or contact us to talk through your situation.
The bottom line
A heat pump shouldn't put you off a house, but it should change the questions you ask. Get the paperwork, get the kWh figures, look at the plant room and the controller, and take any pile-up of red flags seriously. Do that and you'll know what you're buying, and what it's likely to cost you in your first winter.


Nov 13, 2026
5 min read
Can You Cool Your Home Through Underfloor Heating? And Does It Actually Work?
Read More

Nov 13, 2026
5 min read
Can You Cool Your Home Through Underfloor Heating? And Does It Actually Work?
Read More

Nov 13, 2026
5 min read
Can You Cool Your Home Through Underfloor Heating? And Does It Actually Work?
Read More

Nov 12, 2026
5 min read
Heat Pump Compressor Failure: Signs, Causes and What to Do (UK Guide)
Read More

Nov 12, 2026
5 min read
Heat Pump Compressor Failure: Signs, Causes and What to Do (UK Guide)
Read More

Nov 12, 2026
5 min read
Heat Pump Compressor Failure: Signs, Causes and What to Do (UK Guide)
Read More
Contact Us
Still having heat pump problems? Talk to an engineer today.
Still having heat pump problems? Talk to an engineer today.
Still having heat pump problems? Talk to an engineer today.
Still having heat pump problems? Talk to an engineer today.
Still having heat pump problems? Talk to an engineer today.
Whether you're planning an installation, need a repair or service, or want independent advice, tell us what's happening and we'll point you in the right direction.
Whether you're planning an installation, need a repair or service, or want independent advice, tell us what's happening and we'll point you in the right direction.
Whether you're planning an installation, need a repair or service, or want independent advice, tell us what's happening and we'll point you in the right direction.




